Assertion list
stud (primary) → ReceivesAction
Results from Ascent++: 61
stud → ReceivesAction → installed 0.67
stud → ReceivesAction → placed 0.59
stud → ReceivesAction → attached 0.54
stud → ReceivesAction → replaced 0.54
stud → ReceivesAction → bent 0.53
stud → ReceivesAction → spaced 0.45
stud → ReceivesAction → spaced at 16 0.42
stud → ReceivesAction → fastened 0.41
stud → ReceivesAction → threaded 0.41
stud → ReceivesAction → made 0.39
stud → ReceivesAction → formed 0.39
stud → ReceivesAction → shown in fig 0.38
stud → ReceivesAction → designed 0.37
stud → ReceivesAction → welded 0.37
stud → ReceivesAction → removed 0.37
stud → ReceivesAction → fixed 0.36
stud → ReceivesAction → installed in relaxedmode 0.36
stud → ReceivesAction → screwed into place 0.36
stud → ReceivesAction → worn in left nostril 0.35
stud → ReceivesAction → separated 0.35
stud → ReceivesAction → fitted 0.34
stud → ReceivesAction → reused 0.34
stud → ReceivesAction → placed in special racks 0.32
stud → ReceivesAction → recommended for most applicatio… 0.32
stud → ReceivesAction → arranged 0.30
stud → ReceivesAction → embedded in the road surface 0.30
stud → ReceivesAction → held in place 0.30
stud → ReceivesAction → recommended 0.30
stud → ReceivesAction → used to decorate other fashion … 0.30
stud → ReceivesAction → drilled 0.28
stud → ReceivesAction → loaded in tension 0.28
stud → ReceivesAction → measured 0.28
stud → ReceivesAction → mounted 0.28
stud → ReceivesAction → notched 0.28
stud → ReceivesAction → pressed 0.28
stud → ReceivesAction → required to absorb vertical for… 0.28
stud → ReceivesAction → treated to 200,000 psi 0.28
stud → ReceivesAction → damaged 0.25
stud → ReceivesAction → cast in sterling silver 0.25
stud → ReceivesAction → driven 0.25
stud → ReceivesAction → eliminated 0.25
stud → ReceivesAction → exposed 0.25
stud → ReceivesAction → fixed to the heat sink 0.25
stud → ReceivesAction → inserted into standard hammer d… 0.25
stud → ReceivesAction → marked 0.25
stud → ReceivesAction → moved to the work piece 0.25
stud → ReceivesAction → placed on center 0.25
stud → ReceivesAction → pulled 0.25
stud → ReceivesAction → screwed 0.25
stud → ReceivesAction → set 0.25
stud → ReceivesAction → spread out along the bottom 0.25
stud → ReceivesAction → tested 0.25
stud → ReceivesAction → torqued 0.25
stud → ReceivesAction → cut 0.24
stud → ReceivesAction → used to decorate belt 0.23
stud → ReceivesAction → used to decorate sneaker 0.23
stud → ReceivesAction → installed at angle 0.16
stud → ReceivesAction → released 0.16
stud → ReceivesAction → tarnished 0.16
stud → ReceivesAction → worn 0.16
stud → ReceivesAction → lost 0.03