drive pulley
(subgroup of
pulley)
→
ReceivesAction
→
connected to the crankshaft
|
0.68 | |
fixed pulley
(subgroup of
pulley)
→
CapableOf
→
change the direction of the force
|
0.68 | |
movable pulley
(subgroup of
pulley)
→
HasA
→
axle
|
0.68 | |
movable pulley
(subgroup of
pulley)
→
ReceivesAction
→
used to transform force
|
0.68 | |
single pulley
(subgroup of
pulley)
→
CapableOf
→
skewer sliding block
|
0.68 | |
single pulley
(subgroup of
pulley)
→
CapableOf
→
screw with short belt
|
0.68 | |
advantage
(aspect of
pulley)
→
CapableOf
→
become apparent
|
0.68 | |
axle
(aspect of
pulley)
→
HasA
→
groove
|
0.68 | |
axle
(aspect of
pulley)
→
ReceivesAction
→
fixed
|
0.68 | |
axle
(aspect of
pulley)
→
ReceivesAction
→
connected to driven gear
|
0.68 | |
groove
(aspect of
pulley)
→
HasProperty
→
deep
|
0.68 | |
wheel
(aspect of
pulley)
→
ReceivesAction
→
tilted to one side
|
0.68 | |
pulley → ReceivesAction → fixed | 0.67 | |
pulley → ReceivesAction → aligned | 0.66 | |
pulley → ReceivesAction → made | 0.66 | |
pulley → ReceivesAction → secured | 0.64 | |
pulley → HasProperty → adjustable | 0.63 | |
pulley → CapableOf → consist of rope | 0.62 | |
pulley → ReceivesAction → replaced | 0.62 | |
pulley → HasProperty → frictionless | 0.60 | |
advantage
(aspect of
pulley)
→
HasProperty
→
apparent
|
0.59 | |
pulley → CapableOf → move the belt | 0.59 | |
pulley → IsA → simple machine | 0.57 | |
pulley → ReceivesAction → removed | 0.57 | |
pulley → HasProperty → larger | 0.57 | |
pulley → HasProperty → loose | 0.54 | |
pulley → HasProperty → tight | 0.53 | |
pulley → CapableOf → adapted to support load | 0.53 | |
pulley → ReceivesAction → oriented | 0.53 | |
pulley → ReceivesAction → used to lift load | 0.52 | |
pulley → ReceivesAction → shown in fig | 0.52 | |
pulley → ReceivesAction → coupled to motor | 0.52 | |
pulley → ReceivesAction → worn | 0.51 | |
pulley → HasProperty → smooth | 0.51 | |
pulley → CapableOf → transmit power | 0.50 | |
pulley → ReceivesAction → connected by belt | 0.50 | |
pulley → ReceivesAction → positioned | 0.50 | |
pulley → ReceivesAction → mounted on shaft | 0.49 | |
pulley → ReceivesAction → installed | 0.49 | |
pulley → ReceivesAction → rotated | 0.49 | |
pulley → HasA → groove | 0.47 | |
pulley → HasProperty → small | 0.47 | |
pulley → HasProperty → bad | 0.47 | |
pulley → ReceivesAction → mounted | 0.45 | |
pulley → ReceivesAction → made smaller | 0.45 | |
pulley → ReceivesAction → attached to the anchor | 0.44 | |
pulley → MadeOf → stainless steel | 0.42 | |
pulley → HasProperty → identical | 0.42 | |
pulley → HasA → cable | 0.42 | |
pulley → CapableOf → stall the motor | 0.42 | |
pulley → ReceivesAction → lubricated | 0.41 | |
pulley → HasProperty → useful | 0.40 | |
pulley → HasProperty → round | 0.40 | |
pulley → HasProperty → essential | 0.39 | |
pulley → CapableOf → drive belt | 0.39 | |
pulley → ReceivesAction → connected to swivel | 0.39 | |
pulley → CapableOf → move the material | 0.39 | |
pulley → ReceivesAction → connected to the engine | 0.39 | |
pulley → ReceivesAction → used in combination | 0.39 | |
pulley → ReceivesAction → damaged | 0.38 | |
pulley → ReceivesAction → attached to the frame | 0.37 | |
pulley → HasA → flange | 0.37 | |
pulley → IsA → machine | 0.37 | |
pulley → CapableOf → conform to original equipment material | 0.37 | |
pulley → ReceivesAction → used in set | 0.35 | |
pulley → HasA → diameter | 0.35 | |
pulley → CapableOf → transmit rotational motion | 0.34 | |
pulley → ReceivesAction → broken | 0.34 | |
alternator → HasA → pulley | 0.32 | |
pulley → CapableOf → become constricting | 0.31 | |
pulley → ReceivesAction → keyed | 0.30 | |
pulley → MadeOf → cast iron | 0.30 | |
pulley → HasProperty → displaceable | 0.30 | |
pulley → CapableOf → lock in place | 0.30 | |
pulley → ReceivesAction → carried at a cantilever distance | 0.30 | |
pulley → ReceivesAction → used at bottom | 0.25 | |
pulley → HasProperty → hard | 0.25 | |
pulley → ReceivesAction → fixed at the top of the plane | 0.25 | |
pulley → SimilarTo → first class lever | 0.25 | |
pulley → HasProperty → coaxial | 0.25 | |
pulley → CapableOf → draw water | 0.25 | |
pulley → ReceivesAction → configured to rotate about first pulley axis | 0.25 | |
pulley → HasProperty → hot | 0.25 | |
pulley → ReceivesAction → accelerated | 0.25 | |
pulley → HasProperty → close | 0.25 | |
pulley → ReceivesAction → selected | 0.25 | |
pulley → ReceivesAction → bored | 0.25 | |
pulley → CapableOf → use a bevel gear interface | 0.25 | |
pulley → MadeOf → a convex | 0.25 | |
pulley → MadeOf → crownedsurface | 0.25 | |
pulley → HasProperty → wide | 0.25 | |
pulley → ReceivesAction → produced for serpentine belt routing applications | 0.25 | |
pulley → CapableOf → conform to tolerance | 0.25 | |
pulley → ReceivesAction → mounted on each axle | 0.25 | |
pulley → ReceivesAction → mounted in parallel mode | 0.25 | |
pulley → ReceivesAction → connected to two jacquard hooks | 0.25 | |
pulley → HasProperty → flush | 0.25 | |
pulley → CapableOf → rotate in opposite direction | 0.25 | |
pulley → ReceivesAction → drilled | 0.25 | |
pulley → HasProperty → new | 0.25 | |
pulley → ReceivesAction → disposed on the bracket | 0.25 | |
drive pulley
(subgroup of
pulley)
→
HasProperty
→
rotatable
|
0.25 | |
advantage
(aspect of
pulley)
→
ReceivesAction
→
obtained
|
0.25 | |
axle
(aspect of
pulley)
→
ReceivesAction
→
designed to support movement
|
0.25 | |
axle
(aspect of
pulley)
→
CapableOf
→
anchor in place
|
0.25 | |
axle
(aspect of
pulley)
→
HasProperty
→
free
|
0.25 | |
kite → HasA → pulley | 0.25 | |
pulley → HasProperty → made lighter | 0.25 | |
pulley → CapableOf → provide wider range of gear ratios | 0.25 | |
pulley → CapableOf → provide little resistance | 0.16 | |
pulley → HasProperty → cool | 0.16 | |
pulley → ReceivesAction → misaligned | 0.16 |