---

bore → ReceivesAction → aligned	0.67
bore → HasProperty → smooth	0.62
bore → ReceivesAction → spaced	0.61
bore → ReceivesAction → shown in fig	0.58
bore → ReceivesAction → positioned	0.57
bore → HasA → diameter	0.56
bore → ReceivesAction → threaded	0.54
bore → ReceivesAction → formed in the bone	0.53
bore → HasProperty → open	0.53
bore → HasProperty → cylindrical	0.52
bore → CapableOf → penetrate subterranean formation	0.51
bore → HasProperty → coaxial	0.50
bore → HasA → longitudinal axis	0.50
bore → ReceivesAction → worn	0.50
bore → ReceivesAction → dimensioned	0.49
bore → HasProperty → clean	0.46
bore → HasProperty → round	0.46
bore → HasProperty → deep	0.44
bore → HasProperty → parallel	0.44
bore → ReceivesAction → tapered	0.43
bore → CapableOf → extend through the housing	0.43
bore → HasA → shoulder	0.42
bore → CapableOf → receive pin	0.42
bore → HasProperty → important	0.41
bore → ReceivesAction → reamed	0.41
bore → ReceivesAction → achieved	0.41
bore → CapableOf → extend to distal end	0.41
bore → HasProperty → good	0.40
bore → CapableOf → extend through top side	0.40
bore → CapableOf → receive shaft	0.40
bore → HasProperty → straight	0.39
bore → CapableOf → extend through the body	0.39
bore → ReceivesAction → angled	0.39
bore → HasA → same diameter	0.39
bore → CapableOf → extend through the shaft	0.37
bore → ReceivesAction → set at 92 x 75.1mm	0.37
bore → CapableOf → extend at angle	0.37
bore → HasProperty → identical	0.37
barrel → HasA → bore	0.37
head → HasA → bore	0.35
bore → CapableOf → receive i.e., circumferentially surrounds	0.35
bore → HasA → circular cross-sectional shape	0.35
bore → CapableOf → extend to second end	0.35
bore → ReceivesAction → bounded by conical	0.35
bore → CapableOf → open out at lower end	0.35
bore → ReceivesAction → configured to receive first anchor	0.35
bore → ReceivesAction → configured to receive second anchor	0.35
tube → HasA → bore	0.35
bore → CapableOf → pass through the metal adapter	0.34
bore → HasProperty → small	0.34
bore → ReceivesAction → positioned on first sleeve member	0.34
bore → CapableOf → extend through the septum	0.34
bore → DefinedAs → first one of the split	0.34
bore → CapableOf → receive the workpiece	0.31
bore → HasProperty → elliptical	0.31
bore → ReceivesAction → honed	0.31
bore → ReceivesAction → cleaned	0.31
bore → CapableOf → receive suture	0.31
bore → HasA → hourglass shape	0.31
bore → HasProperty → tight	0.30
turbine → AtLocation → bore	0.30
compression ratio (aspect of engine) → IsA → the bore	0.29
bore → ReceivesAction → reduced	0.29
bore → ReceivesAction → created	0.29
bore → CapableOf → raise ambient fluid pressure	0.29
bore → CapableOf → experience impact	0.29
bore → ReceivesAction → adapted to receive the pin	0.29
bore → CapableOf → form apical opening	0.29
bore → ReceivesAction → turned	0.29
bore → ReceivesAction → bored	0.29
bore → ReceivesAction → closed by fluid-tight, gas-permeable membrane	0.29
bore → ReceivesAction → dialed	0.29
bore → CapableOf → increase the compression ratio	0.29
bore → ReceivesAction → disposed along longitudinal axis of the body	0.29
bore → CapableOf → say at least two check-valves	0.29
bore → ReceivesAction → adapted to engage a drive shaft	0.29
bore → ReceivesAction → employed	0.29
bore → ReceivesAction → provided in the flange	0.29
bore → ReceivesAction → located off-center	0.29
bore → AtLocation → inner spacer	0.29
bore → ReceivesAction → positioned in the top of coupler	0.29
bore → CapableOf → form spring	0.29
bore → CapableOf → comprise a concave portion	0.29
bore → ReceivesAction → closed	0.29
bore → AtLocation → fixed relation	0.29
bore → ReceivesAction → fixed to the set of tongs	0.29
bore → CapableOf → set ball plungers	0.29
bore → ReceivesAction → free of a mud cake	0.29
bore → ReceivesAction → configured to provide a thirty degree	0.29
socket → HasA → bore	0.28
arm → HasA → bore	0.27
needle → HasA → bore	0.27
bore → CapableOf → remain after removal of the guide	0.25
bore → HasProperty → varied	0.25
bore → CapableOf → extend to proximal end of said shield	0.25
bore → CapableOf → receive one of the fasteners	0.25
bore → HasA → a plurality of openings	0.25
bore → HasProperty → orthogonal	0.25
bore → ReceivesAction → notched	0.25
bore → ReceivesAction → connected	0.25
bore → IsA → the diameter of the cylinder	0.25
bore → ReceivesAction → repaired	0.25
bore → ReceivesAction → discussed	0.25
bore → HasA → circular cross	0.25
bore → ReceivesAction → filled with oil	0.25
bore → CapableOf → extend to geologic formation	0.25
bore → CapableOf → extend through the screw	0.25
bore → CapableOf → extend through distal end of the shank	0.25
bore → ReceivesAction → threaded with thread	0.25
bore → ReceivesAction → decreased in cross section	0.25
bore → HasProperty → true	0.25
bore → HasProperty → clear	0.25
bore → HasA → first and second diameter portion	0.25
bore → HasProperty → sharp	0.25
bore → ReceivesAction → formed in the spacer member	0.25
bore → CapableOf → extend through the support member	0.25
bore → HasProperty → unobstructed	0.25
bore → CapableOf → set conventional threaded fasteners	0.25
bore → ReceivesAction → formed in the body	0.25
bore → CapableOf → pass through cylindrical axis	0.25
bore → DefinedAs → bifurcated sections	0.25
bore → ReceivesAction → formed in trailing end of the clip	0.25
bore → ReceivesAction → formed through the sustainer	0.25
bore → ReceivesAction → provided with circumferentially extending ratchet	0.25
cannula → HasA → bore	0.25
conduit → HasA → bore	0.25
shank → HasA → bore	0.25
valve → HasA → bore	0.25
bore → HasProperty → nearby	0.23
bore → ReceivesAction → compromised	0.20
bore → ReceivesAction → fouled	0.16
bore → ReceivesAction → maintained	0.16
bore → HasProperty → long	0.16
bore → HasProperty → more joyous	0.16
bore → CapableOf → look good	0.16