| rotor → ReceivesAction → removed | 0.70 | |
brake rotor
(subgroup of
rotor)
→
ReceivesAction
→
warped
|
0.69 | |
new rotor
(subgroup of
rotor)
→
ReceivesAction
→
installed
|
0.68 | |
rotor
(aspect of
helicopter)
→
CapableOf
→
turn in opposite directions
|
0.68 | |
rotor
(aspect of
turbine)
→
ReceivesAction
→
connected to main shaft
|
0.68 | |
| rotor → ReceivesAction → machined | 0.66 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
magnetized
|
0.65 | |
| rotor → ReceivesAction → replaced | 0.64 | |
| rotor → HasProperty → smooth | 0.61 | |
| rotor → ReceivesAction → resurfaced | 0.60 | |
| rotor → CapableOf → generate torque | 0.60 | |
| motor → HasA → rotor | 0.60 | |
| rotor → ReceivesAction → drilled | 0.58 | |
| rotor → CapableOf → rotate in same direction | 0.57 | |
rotor
(aspect of
motor)
→
CapableOf
→
rotate within the stator
|
0.57 | |
| rotor → ReceivesAction → finished with black zinc plating | 0.56 | |
rotor
(aspect of
motor)
→
HasProperty
→
stationary
|
0.54 | |
| rotor → ReceivesAction → held in place | 0.54 | |
| rotor → CapableOf → eliminate the need | 0.53 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
mounted on shaft
|
0.53 | |
| rotor → ReceivesAction → magnetized | 0.52 | |
| rotor → HasA → minimum thickness | 0.52 | |
rotor
(aspect of
motor)
→
CapableOf
→
rotate at synchronous speed
|
0.52 | |
| rotor → CapableOf → rotate in opposite directions | 0.52 | |
| rotor → ReceivesAction → vented | 0.51 | |
rotor
(aspect of
motor)
→
HasA
→
winding
|
0.51 | |
| rotor → HasProperty → thinner | 0.51 | |
| rotor → MadeOf → cast iron | 0.51 | |
| rotor → CapableOf → rotate within the stator | 0.50 | |
| rotor → ReceivesAction → shown in fig | 0.50 | |
| rotor → ReceivesAction → changed | 0.50 | |
| rotor → CapableOf → rotate at high speed | 0.49 | |
| rotor → HasProperty → stationary | 0.49 | |
| rotor → CapableOf → rotate with wheel | 0.49 | |
| rotor → HasProperty → flat | 0.49 | |
| rotor → HasProperty → unbalanced | 0.49 | |
rotor
(aspect of
motor)
→
CapableOf
→
rotate with respect
|
0.49 | |
rotor
(aspect of
turbine)
→
CapableOf
→
rotate in opposite directions
|
0.48 | |
| rotor → HasProperty → rotatable | 0.48 | |
| rotor → CapableOf → interact with the camshaft | 0.48 | |
| rotor → ReceivesAction → produced with laminate surfaces | 0.48 | |
| rotor → ReceivesAction → cleaned | 0.48 | |
| rotor → ReceivesAction → slotted | 0.48 | |
| rotor → ReceivesAction → attached to the shaft | 0.48 | |
| rotor → ReceivesAction → worn | 0.47 | |
| rotor → CapableOf → attach to the axle | 0.47 | |
brake rotor
(subgroup of
rotor)
→
ReceivesAction
→
replaced
|
0.47 | |
| rotor → CapableOf → consist of hammer | 0.46 | |
| rotor → ReceivesAction → driven by motor | 0.46 | |
| rotor → HasProperty → tight | 0.45 | |
| rotor → MadeOf → metal | 0.45 | |
rotor
(aspect of
motor)
→
CapableOf
→
rotate inside the epiterchoid chamber
|
0.44 | |
rotor
(aspect of
motor)
→
CapableOf
→
travel over the exhaust port
|
0.44 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
shown in fig
|
0.44 | |
| rotor → CapableOf → consist of pin shafts | 0.44 | |
| rotor → HasProperty → new | 0.44 | |
| rotor → CapableOf → rotate about axis | 0.44 | |
| rotor → ReceivesAction → mounted on shaft | 0.43 | |
| rotor → CapableOf → rotate at synchronous speed | 0.43 | |
| rotor → HasA → floating mount system | 0.43 | |
| rotor → CapableOf → mount on shaft | 0.43 | |
| rotor → CapableOf → consist of main shaft | 0.43 | |
| rotor → CapableOf → dissipate heat | 0.43 | |
| rotor → ReceivesAction → connected to the wheel | 0.42 | |
| rotor → CapableOf → turn at same speed | 0.42 | |
| rotor → CapableOf → comprise a plurality of blades | 0.42 | |
| rotor → MadeOf → steel | 0.42 | |
| rotor → CapableOf → turn slower than the frequency | 0.42 | |
| rotor → HasProperty → simple | 0.41 | |
| rotor → ReceivesAction → attached to the hub | 0.41 | |
| rotor → CapableOf → spin at high speed | 0.41 | |
| rotor → CapableOf → interact with the stator | 0.41 | |
| rotor → HasProperty → lighter | 0.41 | |
| rotor → HasA → winding | 0.41 | |
| rotor → ReceivesAction → cast | 0.41 | |
| rotor → AtLocation → autorotation | 0.41 | |
| rotor → ReceivesAction → sold | 0.41 | |
| rotor → CapableOf → face the wind | 0.41 | |
brake rotor
(subgroup of
rotor)
→
HasProperty
→
perfect
|
0.41 | |
| rotor → Causes → vibration | 0.41 | |
rotor
(aspect of
motor)
→
HasProperty
→
rotatable
|
0.41 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
removed
|
0.41 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
carried by a blade assembly
|
0.41 | |
| rotor → CapableOf → generate power | 0.41 | |
| rotor → ReceivesAction → free to turn | 0.40 | |
| rotor → CapableOf → rotate with respect | 0.40 | |
| rotor → HasProperty → compatible | 0.40 | |
| rotor → CapableOf → spin in opposite directions | 0.39 | |
| rotor → HasProperty → close | 0.39 | |
| rotor → CapableOf → turn within the stator | 0.39 | |
| rotor → ReceivesAction → added | 0.39 | |
| rotor → CapableOf → measure at 15.7 inches | 0.39 | |
| rotor → CapableOf → turn mounting flange | 0.39 | |
rotor
(aspect of
motor)
→
CapableOf
→
turn slower than the frequency
|
0.39 | |
| rotor → HasProperty → effective | 0.38 | |
| rotor → CapableOf → rotate off-center | 0.38 | |
| rotor → ReceivesAction → connected to the drive shaft | 0.38 | |
steam turbine
(subgroup of
turbine)
→
HasA
→
rotor
|
0.38 | |
| rotor → HasA → diameter | 0.38 | |
| rotor → CapableOf → absorb heat | 0.37 | |
| rotor → ReceivesAction → energized | 0.37 | |
| rotor → ReceivesAction → selected | 0.37 | |
| rotor → CapableOf → warp | 0.37 | |
| rotor → CapableOf → slow the vehicle | 0.37 | |
| rotor → CapableOf → wind the mainspring | 0.37 | |
| rotor → ReceivesAction → supported by bearing | 0.37 | |
brake rotor
(subgroup of
rotor)
→
MadeOf
→
cast iron
|
0.37 | |
rotor
(aspect of
motor)
→
CapableOf
→
align with the stator
|
0.36 | |
rotor
(aspect of
motor)
→
CapableOf
→
rotate with the shaft
|
0.36 | |
rotor
(aspect of
motor)
→
HasA
→
commutator
|
0.36 | |
| rotor → CapableOf → create magnetic field | 0.36 | |
| rotor → ReceivesAction → cut | 0.36 | |
| rotor → CapableOf → run at synchronous speed | 0.36 | |
| rotor → CapableOf → comprise impeller | 0.36 | |
| rotor → ReceivesAction → spaced | 0.36 | |
| rotor → ReceivesAction → located inside the stator | 0.36 | |
| rotor → CapableOf → rotate clockwise | 0.36 | |
| rotor → ReceivesAction → connected to each other | 0.36 | |
| rotor → ReceivesAction → described | 0.36 | |
| turbine → HasA → rotor | 0.36 | |
rotor
(aspect of
helicopter)
→
CapableOf
→
slap at the water
|
0.35 | |
| rotor → CapableOf → look great | 0.35 | |
| rotor → ReceivesAction → measured | 0.35 | |
| rotor → CapableOf → utilize curved vane design | 0.35 | |
| rotor → CapableOf → generate electrical current | 0.35 | |
| rotor → ReceivesAction → offset in off-center | 0.35 | |
| rotor → MadeOf → magnetic material | 0.35 | |
| rotor → CapableOf → pick up speed | 0.35 | |
| rotor → CapableOf → stop the vehicle | 0.35 | |
| rotor → CapableOf → never show corrosion | 0.35 | |
| rotor → ReceivesAction → used in normal driving | 0.35 | |
| rotor → CapableOf → comprise a plurality of permanent magnets | 0.35 | |
| rotor → HasProperty → flexible | 0.35 | |
| rotor → HasProperty → strong | 0.35 | |
| rotor → ReceivesAction → fixed | 0.35 | |
| rotor → MadeOf → stainless steel | 0.35 | |
| rotor → MadeOf → material | 0.35 | |
| rotor → ReceivesAction → carried by a blade assembly | 0.35 | |
| rotor → HasA → a plurality of poles | 0.35 | |
| centrifuge → HasA → rotor | 0.35 | |
| titanium → UsedFor → rotor | 0.34 | |
| rotor → HasProperty → good | 0.34 | |
| rotor → HasProperty → fine | 0.34 | |
| rotor → ReceivesAction → aligned with the stator | 0.34 | |
| rotor → ReceivesAction → pitted | 0.34 | |
| rotor → CapableOf → maintain spiral waves | 0.34 | |
| rotor → ReceivesAction → connected to the output shaft | 0.34 | |
| rotor → HasProperty → important | 0.34 | |
| rotor → HasProperty → suitable | 0.34 | |
| rotor → ReceivesAction → spun at high revolutions | 0.34 | |
| rotor → ReceivesAction → engaged with the generator mechanism | 0.34 | |
| rotor → CapableOf → consist of cylindrical laminated core | 0.34 | |
| rotor → HasA → a plurality of magnetic poles | 0.34 | |
| rotor → ReceivesAction → positioned within milling chamber | 0.34 | |
| rotor → CapableOf → rotate in the casing | 0.34 | |
rotor
(aspect of
motor)
→
CapableOf
→
run at speed
|
0.33 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
formed with through bore
|
0.33 | |
| rotor → CapableOf → become worn | 0.33 | |
rotor
(aspect of
turbine)
→
CapableOf
→
turn the low-speed shaft
|
0.33 | |
rotor
(aspect of
turbine)
→
CapableOf
→
face into the wind
|
0.33 | |
rotor
(aspect of
turbine)
→
CapableOf
→
capture kinetic energy of the wind
|
0.33 | |
| rotor → HasProperty → low | 0.32 | |
| rotor → CapableOf → ensure optimal performance | 0.32 | |
| rotor → CapableOf → wear over time | 0.32 | |
| rotor → ReceivesAction → visualized in current study | 0.32 | |
| rotor → CapableOf → work in conjunction | 0.32 | |
| rotor → HasProperty → identical | 0.32 | |
| rotor → ReceivesAction → displaced to the position | 0.32 | |
| rotor → MadeOf → three parts | 0.32 | |
| rotor → MadeOf → plastic | 0.32 | |
| rotor → CapableOf → reach synchronous speed | 0.32 | |
| rotor → CapableOf → consist of commutator | 0.32 | |
| rotor → CapableOf → save money | 0.32 | |
| rotor → CapableOf → decelerate to stop | 0.32 | |
| rotor → CapableOf → make the motor work | 0.32 | |
| rotor → CapableOf → measure at the rears measure | 0.32 | |
| rotor → CapableOf → give a 131-meter 429 foot | 0.32 | |
| rotor → CapableOf → intermesh over the top of the aircraft | 0.32 | |
| rotor → CapableOf → sit atop the flywheel | 0.32 | |
| rotor → ReceivesAction → handled | 0.32 | |
| rotor → CapableOf → rotate with the shaft | 0.32 | |
| rotor → HasA → particular varying magnetism | 0.32 | |
| rotor → ReceivesAction → turned by hand | 0.32 | |
| rotor → HasProperty → unpowered | 0.32 | |
| rotor → ReceivesAction → provided with a bypass channel | 0.32 | |
rotor
(aspect of
helicopter)
→
CapableOf
→
consist of two or more rotor blades
|
0.31 | |
rotor
(aspect of
helicopter)
→
CapableOf
→
intermesh over the top of the aircraft
|
0.31 | |
rotor
(aspect of
helicopter)
→
ReceivesAction
→
required to stop helicopter
|
0.31 | |
brake rotor
(subgroup of
rotor)
→
CapableOf
→
measure 16.1 inches
|
0.31 | |
| rotor → ReceivesAction → secured | 0.30 | |
| rotor → CapableOf → show the highest chemical resistance | 0.30 | |
| rotor → IsA → the armature | 0.30 | |
| rotor → CapableOf → shed 10 | 0.30 | |
| rotor → ReceivesAction → separated by small air-gap | 0.30 | |
| rotor → ReceivesAction → serviced | 0.30 | |
| rotor → CapableOf → separate central hub | 0.30 | |
| rotor → ReceivesAction → free to expand | 0.30 | |
| rotor → CapableOf → reach 6,000 rpm | 0.30 | |
| rotor → ReceivesAction → formed with through bore | 0.30 | |
| rotor → CapableOf → provide thrust | 0.30 | |
| rotor → ReceivesAction → constructed without any iron core | 0.30 | |
| rotor → CapableOf → capture kinetic energy of the wind | 0.30 | |
| rotor → CapableOf → coast to stop | 0.30 | |
| rotor → HasA → same number of poles | 0.30 | |
| rotor → HasA → only two degrees of freedom | 0.30 | |
| rotor → CapableOf → consist of mast | 0.30 | |
rotor
(aspect of
motor)
→
CapableOf
→
induce e.m.f
|
0.30 | |
rotor
(aspect of
motor)
→
CapableOf
→
turn at same speed
|
0.30 | |
rotor
(aspect of
motor)
→
CapableOf
→
oscillate at high frequency
|
0.30 | |
rotor
(aspect of
motor)
→
CapableOf
→
close the inlet port
|
0.30 | |
rotor
(aspect of
motor)
→
MadeOf
→
two discs
|
0.30 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
constructed without any iron core
|
0.30 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
centered with more than one
|
0.30 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
adapted to radial arm
|
0.30 | |
| rotor → CapableOf → move of hat | 0.28 | |
| rotor → CapableOf → stay flatter | 0.28 | |
| rotor → HasProperty → misaligned | 0.28 | |
| rotor → MadeOf → .35mm laminations | 0.28 | |
| rotor → HasA → mechanical bearings | 0.28 | |
| rotor → MadeOf → graphite | 0.28 | |
| rotor → ReceivesAction → stored | 0.28 | |
| rotor → CapableOf → strike the ground | 0.28 | |
| rotor → CapableOf → give more leverage | 0.28 | |
| rotor → HasProperty → movable | 0.28 | |
| rotor → CapableOf → run at speed | 0.28 | |
| rotor → ReceivesAction → repaired | 0.28 | |
| rotor → HasProperty → rough | 0.28 | |
| rotor → MadeOf → titanium | 0.28 | |
| rotor → ReceivesAction → brought | 0.28 | |
| rotor → ReceivesAction → clamped | 0.28 | |
| rotor → ReceivesAction → located on naves of wheels | 0.28 | |
| rotor → HasA → notch | 0.28 | |
| rotor → ReceivesAction → refinished | 0.28 | |
| rotor → ReceivesAction → plated | 0.28 | |
| rotor → CapableOf → continue to rotate at suitable pitch setting | 0.28 | |
| rotor → ReceivesAction → drawn through the air | 0.28 | |
| rotor → HasA → flow ducts | 0.28 | |
| rotor → HasA → several fluid conduits | 0.28 | |
| rotor → CapableOf → start running in same direction | 0.28 | |
| rotor → CapableOf → check for runout | 0.28 | |
| rotor → MadeOf → composites such as carbon fibre | 0.28 | |
| rotor → CapableOf → possess three degrees of rotational freedom | 0.28 | |
| rotor → CapableOf → spin about one axis | 0.28 | |
| rotor → MadeOf → specially heat treated carbon steel | 0.28 | |
| rotor → HasA → cylindrical circumferential surface | 0.28 | |
| rotor → ReceivesAction → adapted to radial arm | 0.28 | |
| rotor → CapableOf → make epicyclic motion | 0.28 | |
| rotor → MadeOf → two discs | 0.28 | |
| rotor → CapableOf → crack | 0.26 | |
| rotor → HasProperty → lightweight | 0.26 | |
| rotor → ReceivesAction → refrigerated at 2-8° c | 0.25 | |
| rotor → CapableOf → turn the generator | 0.25 | |
| rotor → CapableOf → increase heat capacity | 0.25 | |
| rotor → CapableOf → turn shaft | 0.25 | |
| rotor → CapableOf → take the punishment | 0.25 | |
| rotor → HasA → a plurality of openings | 0.25 | |
| rotor → ReceivesAction → attached to the back of the movement | 0.25 | |
| rotor → CapableOf → spin around the inside of the watch | 0.25 | |
| rotor → PartOf → a turbine | 0.25 | |
| rotor → HasA → the lowest profile | 0.25 | |
| rotor → AtLocation → phase | 0.25 | |
| rotor → ReceivesAction → disposed along an axis of the fan | 0.25 | |
| rotor → ReceivesAction → skeletonized | 0.25 | |
| rotor → HasProperty → blue | 0.25 | |
| rotor → ReceivesAction → tested | 0.25 | |
| rotor → HasProperty → compressible | 0.25 | |
| rotor → ReceivesAction → spun up by the engine | 0.25 | |
| rotor → ReceivesAction → circuited | 0.25 | |
| rotor → HasA → hydrodynamic surface | 0.25 | |
| rotor → ReceivesAction → on the inside | 0.25 | |
| rotor → ReceivesAction → connected in series | 0.25 | |
| rotor → HasA → ventilated design | 0.25 | |
| rotor → ReceivesAction → brought up to temperature | 0.25 | |
| rotor → ReceivesAction → allowed to cool down over several cycles | 0.25 | |
| rotor → ReceivesAction → sold as matched set | 0.25 | |
| rotor → CapableOf → slap at the water | 0.25 | |
| rotor → HasA → at least one fluid channel | 0.25 | |
| rotor → CapableOf → replace pad | 0.25 | |
| rotor → ReceivesAction → positioned by the positioning unit | 0.25 | |
| rotor → ReceivesAction → positioned at drive start position | 0.25 | |
| rotor → CapableOf → move in straight line | 0.25 | |
| rotor → ReceivesAction → mounted to the pod | 0.25 | |
| rotor → CapableOf → take classic rotary speaker design | 0.25 | |
| rotor → CapableOf → come to standstill | 0.25 | |
| rotor → ReceivesAction → required to produce translational displacement of the plunger | 0.25 | |
| rotor → ReceivesAction → detected | 0.25 | |
| rotor → CapableOf → run to the left | 0.25 | |
| rotor → ReceivesAction → supported for relative rotary motion | 0.25 | |
| rotor → HasA → 509 parts | 0.25 | |
| rotor → HasA → hole | 0.25 | |
| rotor → CapableOf → make one complete revolution | 0.25 | |
| rotor → ReceivesAction → mounted on the ac motor's shaft | 0.25 | |
| rotor → HasProperty → common | 0.25 | |
| rotor → ReceivesAction → generated in 2d model of atrial tissue | 0.25 | |
| rotor → CapableOf → provide both lift | 0.25 | |
| rotor → CapableOf → change discharging granularity | 0.25 | |
| rotor → CapableOf → change the shape of the materials | 0.25 | |
| rotor → ReceivesAction → pre | 0.25 | |
| rotor → CapableOf → extend around inner periphery | 0.25 | |
| rotor → ReceivesAction → accelerated in no-lift pitch | 0.25 | |
| rotor → CapableOf → fit inside the stator magnets | 0.25 | |
| rotor → CapableOf → provide a return path | 0.25 | |
| rotor → ReceivesAction → adorned with the piaget coat-of-arms, sunburst | 0.25 | |
| rotor → ReceivesAction → adorned with chamfered bridges | 0.25 | |
| rotor → ReceivesAction → adorned with circular stain-brushed wheels | 0.25 | |
| rotor → ReceivesAction → adorned with silver-toned screws | 0.25 | |
| rotor → MadeOf → bronze | 0.25 | |
| rotor → CapableOf → vent to aid brake cooling | 0.25 | |
| rotor → CapableOf → vent to aid gas | 0.25 | |
| rotor → ReceivesAction → connected to the vessel | 0.25 | |
| rotor → ReceivesAction → supported by the tower | 0.25 | |
| rotor → CapableOf → rotate ccw | 0.25 | |
| rotor → HasProperty → solid | 0.25 | |
| rotor → ReceivesAction → pulled with positive torque | 0.25 | |
| rotor → HasPrerequisite → certain amount of mass | 0.25 | |
| rotor → ReceivesAction → levitated | 0.25 | |
| rotor → HasProperty → washable | 0.25 | |
| rotor → HasA → a magnetic position sensor receiver | 0.25 | |
| rotor → CapableOf → grind a work surface | 0.25 | |
| rotor → ReceivesAction → represented as rigid body | 0.25 | |
| rotor → HasA → lip | 0.25 | |
| rotor → CapableOf → reduce vibration | 0.25 | |
| rotor → HasA → upper and lower circumferential extensions | 0.25 | |
| rotor → CapableOf → continue to provide centrifugal forces | 0.25 | |
| rotor → ReceivesAction → disposed in the motor end cap | 0.25 | |
| rotor → ReceivesAction → connected to mechanical load | 0.25 | |
| rotor → ReceivesAction → on the outside | 0.25 | |
| rotor → ReceivesAction → provided in mixing vessel | 0.25 | |
| rotor → CapableOf → pass by the stator air gap | 0.25 | |
| rotor → ReceivesAction → wrapped | 0.25 | |
| rotor → CapableOf → comprise main body portion | 0.25 | |
| rotor → MadeOf → superconducting material | 0.25 | |
| rotor → ReceivesAction → attached to a tilting mechanism | 0.25 | |
| rotor → ReceivesAction → coupled to rotor cooling system | 0.25 | |
| rotor → ReceivesAction → secured to the throttle shaft | 0.25 | |
| rotor → ReceivesAction → supported at the center of the substrate | 0.25 | |
| rotor → CapableOf → provide mechanical power | 0.25 | |
| rotor → ReceivesAction → provided with plurality | 0.25 | |
| rotor → HasProperty → classified | 0.25 | |
| rotor → MadeOf → hard chrome plate | 0.25 | |
| rotor → CapableOf → rotate 1 position | 0.25 | |
brake rotor
(subgroup of
rotor)
→
ReceivesAction
→
inspected
|
0.25 | |
brake rotor
(subgroup of
rotor)
→
ReceivesAction
→
resurfaced
|
0.25 | |
brake rotor
(subgroup of
rotor)
→
ReceivesAction
→
worn
|
0.25 | |
rotor
(aspect of
helicopter)
→
CapableOf
→
hit the ground
|
0.25 | |
rotor
(aspect of
helicopter)
→
CapableOf
→
decay to the point
|
0.25 | |
rotor
(aspect of
motor)
→
CapableOf
→
face opposite magnet
|
0.25 | |
rotor
(aspect of
turbine)
→
CapableOf
→
attach to the nacelle
|
0.25 | |
rotor
(aspect of
turbine)
→
CapableOf
→
spin like propeller
|
0.25 | |
rotor
(aspect of
turbine)
→
CapableOf
→
comprise a plurality of blades
|
0.25 | |
rotor
(aspect of
motor)
→
HasA
→
hydrodynamic surface
|
0.25 | |
rotor
(aspect of
motor)
→
HasA
→
outer diameter
|
0.25 | |
rotor
(aspect of
helicopter)
→
HasProperty
→
strong
|
0.25 | |
rotor
(aspect of
helicopter)
→
HasProperty
→
unpowered
|
0.25 | |
rotor
(aspect of
motor)
→
MadeOf
→
superconducting material
|
0.25 | |
rotor
(aspect of
turbine)
→
PartOf
→
a turbine
|
0.25 | |
rotor
(aspect of
helicopter)
→
ReceivesAction
→
replaced
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
mounted
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
on the outside
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
connected to the output shaft
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
supported
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
on the inside
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
pulled with positive torque
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
supported by main body frame
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
fixed
|
0.25 | |
rotor
(aspect of
motor)
→
ReceivesAction
→
attached to a tilting mechanism
|
0.25 | |
rotor
(aspect of
turbine)
→
ReceivesAction
→
designed
|
0.25 | |
rotor
(aspect of
turbine)
→
ReceivesAction
→
powered by a variety of methods
|
0.25 | |
rotor
(aspect of
turbine)
→
ReceivesAction
→
comprised of multiple stages
|
0.25 | |
motor
(aspect of
fan)
→
HasA
→
rotor
|
0.25 | |
brake rotor
(subgroup of
rotor)
→
HasProperty
→
bad
|
0.22 | |
| rotor → CapableOf → start to wear to the point | 0.21 | |
| rotor → Causes → even noticeable pulsation | 0.21 | |
| rotor → HasProperty → cheap | 0.21 | |
| rotor → HasProperty → bad | 0.21 | |
| rotor → ReceivesAction → placed to good effect | 0.19 | |
| rotor → HasProperty → expensive | 0.19 | |
| rotor → HasProperty → more efficient | 0.19 | |
| rotor → ReceivesAction → corroded | 0.19 | |
| rotor → HasProperty → deformed | 0.19 | |
| rotor → MadeOf → magnesium | 0.19 | |
| rotor → CapableOf → add original touch of imagination | 0.16 | |
| rotor → CapableOf → go bad | 0.16 | |
| rotor → CapableOf → turned on a brake lathe | 0.16 | |
| rotor → HasProperty → overheated | 0.16 | |
| rotor → CapableOf → remain in standstill condition | 0.16 | |
| rotor → HasProperty → old | 0.16 | |
| rotor → CapableOf → spin with perfect balance | 0.16 | |
| rotor → MadeOf → silica gel | 0.16 | |
| rotor → CapableOf → feature positive push button | 0.16 | |
| rotor → HasProperty → hard | 0.16 | |
| rotor → HasProperty → awesome | 0.16 | |
| rotor → CapableOf → increase efficiency | 0.16 | |
| rotor → ReceivesAction → protected against wear | 0.16 | |
| rotor → HasA → long service life | 0.16 | |
rotor
(aspect of
turbine)
→
ReceivesAction
→
coupled to our designed low inertia
|
0.16 |